AIRCOM sleeves filters
Dust & fume collector with fully automatic reverse pulse cleaning.
Working principle
Coral's AIRCOM sleeves reverse pulse jet filter is a highly efficient, self maintaining filter for dusts, with fully automatic cleaning by compressed air injection. The unit is manufactured with individual, reinforced, painted steel panels which make for extremely robust contruction. The design includes an upper chamber which houses the compressed air cleaning system, the centre section which includes the required filtering sleeves and a lower section with the supporting legs, hopper and polluted air inlet.
Coral's AIRCOM sleeves reverse pulse jet filter is a highly efficient, self maintaining filter for dusts, with fully automatic cleaning by compressed air injection. The unit is manufactured with individual, reinforced, painted steel panels which make for extremely robust contruction. The design includes an upper chamber which houses the compressed air cleaning system, the centre section which includes the required filtering sleeves and a lower section with the supporting legs, hopper and polluted air inlet.
EVOLUTION NO-SMOKE self-supporting suction arm
The Evolution no-smoke self-supporting
suction arm represents the best technical solution for the suction of
welding smoke, gas, vapours, aerosol, oil fumes, dusts, etc..
Operating Principle
The polluted air is sucked in through the jointed hood and passes through pipes made of sturdy sheet metal (zinc-plated, inox, scratchproof enamelled, aluminum) to the high-efficiency fan or to the system’s central piping system, and from here to the filtering unit used in the specific applications. The pipes and the hood of the Evolution no-smoke are coupled together by special external articulated joints that we have patented, and a high resistance flexible pipe NO-SMOKE FLEX which allow easy and convenient movement of the arm. The Evolution no-smoke arm is also equipped with a rotary bearing which enables rotation through even 360° if installed on its special stand. The flow of polluted air that passes through the suction duct created in the arm, is not therefore, hindered by internal joints or articulations. Due to the reduced length of the hose used in the elbows, load losses are far lower than with other similar systems on the market. Less load loss means: lower fan power, hence energy saving; lower air flow speed, hence less noise.
The polluted air is sucked in through the jointed hood and passes through pipes made of sturdy sheet metal (zinc-plated, inox, scratchproof enamelled, aluminum) to the high-efficiency fan or to the system’s central piping system, and from here to the filtering unit used in the specific applications. The pipes and the hood of the Evolution no-smoke are coupled together by special external articulated joints that we have patented, and a high resistance flexible pipe NO-SMOKE FLEX which allow easy and convenient movement of the arm. The Evolution no-smoke arm is also equipped with a rotary bearing which enables rotation through even 360° if installed on its special stand. The flow of polluted air that passes through the suction duct created in the arm, is not therefore, hindered by internal joints or articulations. Due to the reduced length of the hose used in the elbows, load losses are far lower than with other similar systems on the market. Less load loss means: lower fan power, hence energy saving; lower air flow speed, hence less noise.
UNIVERSAL NO-SMOKE self-supporting suction arm
The UNIVERSAL NO-SMOKE self-supporting
suction arm represents the best technical solution for the suction of
welding smoke, gas, vapours, aerosol, oil fumes, dusts, etc..
Operating principle
The polluted air is sucked in through the articulated hood and passes through pipes made of sturdy sheet metal (zinc-plated, inox, stainless steel, scratchproof enamelled, aluminum) to the high-efficiency centrifugal fan or to the system’s central piping system, and from here to the filtering unit used in the specific applications. The pipes and the hood of the UNIVERSAL NO-SMOKE are coupled together by special external articulated joints that we have patented. These joints have a high resistance No-Smoke Flex hose allowing easy and convenient movement of the arm. The UNIVERSAL NO-SMOKE is also fitted with a special system which enables rotation through even 360° if installed on its special stand. The flow of polluted air that passes through the suction duct created in the arm, is not therefore, hindered by internal joints or articulations. Due to the reduced length of the hose used in the elbows, load losses are far lower than with other similar systems on the market. Less load loss means: lower fan power, hence energy saving; lower air flow speed, hence less noise.
The polluted air is sucked in through the articulated hood and passes through pipes made of sturdy sheet metal (zinc-plated, inox, stainless steel, scratchproof enamelled, aluminum) to the high-efficiency centrifugal fan or to the system’s central piping system, and from here to the filtering unit used in the specific applications. The pipes and the hood of the UNIVERSAL NO-SMOKE are coupled together by special external articulated joints that we have patented. These joints have a high resistance No-Smoke Flex hose allowing easy and convenient movement of the arm. The UNIVERSAL NO-SMOKE is also fitted with a special system which enables rotation through even 360° if installed on its special stand. The flow of polluted air that passes through the suction duct created in the arm, is not therefore, hindered by internal joints or articulations. Due to the reduced length of the hose used in the elbows, load losses are far lower than with other similar systems on the market. Less load loss means: lower fan power, hence energy saving; lower air flow speed, hence less noise.
New CLEANGO & New CLEANGO WALL mobile dust collector
CLEANGO is a compact portable unit
designed for occasional use with low amounts of dust & smoke.
DYNAFLEX 2/3 meter flexible Arm requires lowest effort in the arms
category. Filter counter monitoring give an increase of safety in
connection with the 12 mq cartridge.
Wall version available (Cleango Wall).
Wall version available (Cleango Wall).
CLEAN GO/E mobile dust collector
Mobile electrostatic filter for extraction and filtering of welding fumes, gases, vapours, aerosol, solvents, etc.
Description
The new unit CLEAN GO/e thanks to its small dimension is easy to use and operational efficient and represents the actual solution for suction, filtering and deodorizing of welding fumes, solvent, vapours, aerosol in work premises.
The new unit CLEAN GO/e thanks to its small dimension is easy to use and operational efficient and represents the actual solution for suction, filtering and deodorizing of welding fumes, solvent, vapours, aerosol in work premises.
CLEAN GO/e is designed according to
up-to-date technologies, suitable in industrial and handicraft field,
where easy to move and small size are requested to the filtering units.
CLEAN GO/e has particularly been studied for use in different fields
such as industrial maintenance, car
repair workshops, hydraulic and light mechanical workshop. Unit
maintenance is only represented by filter replacement and this is a
simple operation requiring short time and unskilled staff. The CLEAN
GO/e suction capacity ensures a good suction of welding fumes but not of
gases to avoid to cool soldering causing dangerous contractions of
metal.
CLEANING DF mobile dust collector
The CLEANING DF mobile dust collectors
are filter units equipped with horizontal cartridges suitable for
suction and filtration of welding fumes, fine and coarse dusts as well
as of small quantities of chips. They are composed by powder coated
steel panels and pre-fitted with articulated arm flanged connection
model UNIVERSAL NO-SMOKE 3.3 mts (Standard) or EVOLUTION NO–SMOKE 3 mts
(Optional) both in Dia 150 mm. They are engineered to be used inside
the work premises.
Operating principle
The polluted air is sucked through the inlet thanks to the depression created by the suction fan positioned on the clean side .The filter unit consists of one vertical pre-chamber, where the heaviest dust sorted out, falling then in a first collecting bin (A). The following labyrinth together with the high efficiency filtering cartridges complete the filtration of the remaining fine dusts collected in the second bin (B). The high performance fan, placed just on the top of the unit, assures a high suction capacity and a low noise level, the clean air is exhausted out through a top grill.
The polluted air is sucked through the inlet thanks to the depression created by the suction fan positioned on the clean side .The filter unit consists of one vertical pre-chamber, where the heaviest dust sorted out, falling then in a first collecting bin (A). The following labyrinth together with the high efficiency filtering cartridges complete the filtration of the remaining fine dusts collected in the second bin (B). The high performance fan, placed just on the top of the unit, assures a high suction capacity and a low noise level, the clean air is exhausted out through a top grill.
Perfect efficiency of the filter cartridge
The CLEANING DF unit is equipped instead with disposable filter cartridges.
The CLEANING DF unit is equipped instead with disposable filter cartridges.
CLEANING NO-SMOKE/E mobile electrostatic filter
The electrostatic precipitator filter CLEANING NO-SMOKE/E is a purifying unit designed for use in numerous applications for the treatment
of industrial pollution. It is especially in demand for its compact
assembly which maintains the internal geometry of the frame with in the
limits imposed by its operation. With consolidated solutions that
include quick and easy maintenance, installation on a standard frame,
the filtering unit CLEANING NO-SMOKE/E is especially flexible to use.
The purifying assembly, as designed by CLEANING NO-SMOKE/E, is composed of 4 filtering stages: 1.mechanical prefilter; 2.ionizing section; 3.collecting section; 4.activated carbon. The core of the entire purifying system is contained in two elements that operate in a completely synchronized manner: the ionizer precedes the collecting cell in the airstream with the special function of electrically charging the particles contained in the airflow. It is in this area, in fact, that the corona effect is created, ensuring operation at the highest levels; the collecting cellworks to capture the pollu-tants.
Optimization of the internal geometries, of the materials with which the filter is built and of the active and passive safety units are the out come of continuous product development aimed at providing quality service and a reduction in operating costs.
The purifying assembly, as designed by CLEANING NO-SMOKE/E, is composed of 4 filtering stages: 1.mechanical prefilter; 2.ionizing section; 3.collecting section; 4.activated carbon. The core of the entire purifying system is contained in two elements that operate in a completely synchronized manner: the ionizer precedes the collecting cell in the airstream with the special function of electrically charging the particles contained in the airflow. It is in this area, in fact, that the corona effect is created, ensuring operation at the highest levels; the collecting cellworks to capture the pollu-tants.
Optimization of the internal geometries, of the materials with which the filter is built and of the active and passive safety units are the out come of continuous product development aimed at providing quality service and a reduction in operating costs.
Application:
welding & oil smokes, gases and fumes in general polluted, vehicle emissions.
welding & oil smokes, gases and fumes in general polluted, vehicle emissions.
JETCLEAN DF mobile dust collector
The JETCLEAN DF mobile dust collectors
are filter units equipped with horizontal cartridges suitable for
suction and filtration of welding fumes, fine and coarse dusts as well
as of small quantities of chips. They are composed by powder coated
steel panels and pre-fitted with articulated arm flanged connection
model UNIVERSAL NO-SMOKE 3.3 mts (Standard) or EVOLUTION NO–SMOKE 3 mts
(Optional) both in Dia 150 mm. They are engineered to be used inside
the work premises.
Operating principle
The polluted air is sucked through the inlet thanks to the depression created by the suction fan positioned on the clean side. The filter unit consists of one vertical pre-chamber, where the heaviest dust sorted out, falling then in a first collecting bin (A). The following labyrinth together with the high efficiency filtering cartridges complete the filtration of the remaining fine dusts collected in the second bin (B). The high performance fan, placed just on the top of the unit, assures a high suction capacity and a low noise level, the clean air is exhausted out through a top grill.
The polluted air is sucked through the inlet thanks to the depression created by the suction fan positioned on the clean side. The filter unit consists of one vertical pre-chamber, where the heaviest dust sorted out, falling then in a first collecting bin (A). The following labyrinth together with the high efficiency filtering cartridges complete the filtration of the remaining fine dusts collected in the second bin (B). The high performance fan, placed just on the top of the unit, assures a high suction capacity and a low noise level, the clean air is exhausted out through a top grill.
Perfect efficiency of the filter cartridge
The JETCLEAN DF thanks to the pneumatic cleaning automatic system (with compressed air) grants the perfect efficiency of the filter cartridge.
The JETCLEAN DF thanks to the pneumatic cleaning automatic system (with compressed air) grants the perfect efficiency of the filter cartridge.
POLIVAL filtering benches
Main application
The new POLIVAL filter benches can be used for a wide range of application in welding, trimming, grinding and lapping operations in the wood, marble , foundry and metal industries. The careful design of noxious fumes and dust as they generated, thus preventing them from being breathed in by the operator, causing irreparable damage.
The new POLIVAL filter benches can be used for a wide range of application in welding, trimming, grinding and lapping operations in the wood, marble , foundry and metal industries. The careful design of noxious fumes and dust as they generated, thus preventing them from being breathed in by the operator, causing irreparable damage.
Energy saving
POLIVAL benches are fitten with filter bags made from special tufted felt which allow filter yields of over 99% to be achieved.
POLIVAL benches are fitten with filter bags made from special tufted felt which allow filter yields of over 99% to be achieved.
Maximum aspiration
Although strong, POLIVAL ‘s aspiration rate does not influence welding operation and does not create draughts since air suction is uniform.
Although strong, POLIVAL ‘s aspiration rate does not influence welding operation and does not create draughts since air suction is uniform.
In addition to our standard models we
are able to build benches of any size, lift and load. For special
applications, we will supply a surface covered with refractory material
on request. The POLIVAL model PR electroventilator, which is fixed onto
the side of the bench, can be supplied in a boxed and also soundproofed
version on request.
IPERJET DF cartridge filters horizontal
The new IPERJET DF filter equipped with
horizontal cartridges is suitable for suction and filtration of welding
fumes, fine and coarse dusts as well as of small quantities of chips,
dusts/fumes from thermal cutting. it is a filter unit to be installed in
side the work premises. if allowed by local regulations, the filtered
air can be recycled in to the working area giving a considerable energy saving.
Operating principle
The filter unit consists of one prechamber, where the most dusts are sorted out, falling then in the first collecting bin. The following labyrinth together with the high efficiency filtering cartridges and the second collecting bin complete the filtration of the remaining dusts. The high performance fan, placed just on the top of the unit, assures a high suction capacity and a low noise level.
The filter unit consists of one prechamber, where the most dusts are sorted out, falling then in the first collecting bin. The following labyrinth together with the high efficiency filtering cartridges and the second collecting bin complete the filtration of the remaining dusts. The high performance fan, placed just on the top of the unit, assures a high suction capacity and a low noise level.
Filter cartridges
The horizontal position of the cartridges allows an easy access and a quick maintenance of the filtering area.
The horizontal position of the cartridges allows an easy access and a quick maintenance of the filtering area.
Control Devices
Thanks to the pneumatic adjustable cleaning system (with compressed air) the perfect efficiency of the cartridges is guaranteed.
Thanks to the pneumatic adjustable cleaning system (with compressed air) the perfect efficiency of the cartridges is guaranteed.
OLISMOKE soft-soldering fumes aspirator
Use
Is a table aspirator for fumes and vapours caused by soft soldering. OLISMOKE is particularly helpful in the electronic, electrotechnical and radiotechnical sector, where the various components are assembled on printed circuits by soft soldering.
Operating principle
The polluted air is removed, by means of a special flexible, articulated hose 100 mm Ø, model OLIFLEX, directly at its source before it can reach the operator's respiratory system. Using a small, high efficiency electrofan, the polluted air is pushed upward where a filter cartridge is positioned.
The OLISMOKE/CA model is equipped with an active carbon filtering cartridge placed on the fan's exhaust which takes care of the filtration of gases and fumes. It is also available as optional an additional cartridge in polyester BIA certified rated to U.S.G.C with high filtering efficiency (OLISMOKE/CA/B).
OLISMOKE therefore improves working conditions and increases production. Thanks to their special construction, OLISMOKE is:
- easy to handle - noiseless - efficient - able to be positioned in all directions - light weight - practical - powerful - compact - inexpensive & with low energy consumption.
Silent
The special construction of the fan that has been used allow for a particularly low noise level.
Energy savings
The removal of polluted fumes from work environment during winter causes a great decrease in temperature. Usually this situation is solved by increasing the heating system which, on the other hand, has the disadvantage of system and management high costs.
OLISMOKE/CA/B represents the solution: to the problem, as the filtered air can be recycled in the premises being the toxicity below the limit value permitted by the law.
Is a table aspirator for fumes and vapours caused by soft soldering. OLISMOKE is particularly helpful in the electronic, electrotechnical and radiotechnical sector, where the various components are assembled on printed circuits by soft soldering.
Operating principle
The polluted air is removed, by means of a special flexible, articulated hose 100 mm Ø, model OLIFLEX, directly at its source before it can reach the operator's respiratory system. Using a small, high efficiency electrofan, the polluted air is pushed upward where a filter cartridge is positioned.
The OLISMOKE/CA model is equipped with an active carbon filtering cartridge placed on the fan's exhaust which takes care of the filtration of gases and fumes. It is also available as optional an additional cartridge in polyester BIA certified rated to U.S.G.C with high filtering efficiency (OLISMOKE/CA/B).
OLISMOKE therefore improves working conditions and increases production. Thanks to their special construction, OLISMOKE is:
- easy to handle - noiseless - efficient - able to be positioned in all directions - light weight - practical - powerful - compact - inexpensive & with low energy consumption.
Silent
The special construction of the fan that has been used allow for a particularly low noise level.
Energy savings
The removal of polluted fumes from work environment during winter causes a great decrease in temperature. Usually this situation is solved by increasing the heating system which, on the other hand, has the disadvantage of system and management high costs.
OLISMOKE/CA/B represents the solution: to the problem, as the filtered air can be recycled in the premises being the toxicity below the limit value permitted by the law.
AEROIL filter unit
The AEROIL filter unit has been made to
purify the air in working premises, where oily fumes, oil mist are
produced and to recover the oil allowing the recycle of it.
Application
MECHANICAL INDUSTRY: lathe for multiple operations, threading machines, gear cutting machines, and so on.
GRAPHIC ARTS: rotary presses for newspapers, ink smoke, etc...
FOOD INDUSTRY: vegetal oil nebulizers, machines for alimentary paste working, etc...
OTHER: turbines, compressors, pumps, greasing machines, nebulizers, etc...
MECHANICAL INDUSTRY: lathe for multiple operations, threading machines, gear cutting machines, and so on.
GRAPHIC ARTS: rotary presses for newspapers, ink smoke, etc...
FOOD INDUSTRY: vegetal oil nebulizers, machines for alimentary paste working, etc...
OTHER: turbines, compressors, pumps, greasing machines, nebulizers, etc...
Oil recovery
The filtered oil collected in the low part of the separator gets out from the oil outlet which guarantees the almost total oil recovery and the relative recycle.
The filtered oil collected in the low part of the separator gets out from the oil outlet which guarantees the almost total oil recovery and the relative recycle.
Reduced overall dimensions
The AEROIL separator is very solid and has reduced dimensions thanks to the inside mounting of the ventilator, allowing an easy adaptability to all machine tools.
The AEROIL separator is very solid and has reduced dimensions thanks to the inside mounting of the ventilator, allowing an easy adaptability to all machine tools.
Technical features
AEROIL range filters are electrostatic and, for this reason, are equipped with power circuit protected from accidental short-circuiting and discharge between electrodes.
AEROIL range filters are electrostatic and, for this reason, are equipped with power circuit protected from accidental short-circuiting and discharge between electrodes.
Characteristics
The AEROIL range air filtering system directly derives from the CORAL Modular range. Specific characteristics are: high filtering efficiency, CORAL dual voltage electrostatic cell, excellent quality price ratio and motor directly coupled to the impeller. The performance and dimensional characteristics of the filters are a considerable advantage in everyday use on processing lines for solving also complex problems of pollution deriving from oil mist and industrial fumes.
The AEROIL range air filtering system directly derives from the CORAL Modular range. Specific characteristics are: high filtering efficiency, CORAL dual voltage electrostatic cell, excellent quality price ratio and motor directly coupled to the impeller. The performance and dimensional characteristics of the filters are a considerable advantage in everyday use on processing lines for solving also complex problems of pollution deriving from oil mist and industrial fumes.
OIL STOP C filter unit
The new oil stop is the latest technical hit for suction and filtering oil mist.
Applications
Mechanical Industry: multiple machining lathes, CNC, threading machines, gear cutting machines, grinding machines, cold pressing machines, etc.
Food Industry: vegetable oil fog spraying machines, alimentary paste machines, etc.
Mechanical Industry: multiple machining lathes, CNC, threading machines, gear cutting machines, grinding machines, cold pressing machines, etc.
Food Industry: vegetable oil fog spraying machines, alimentary paste machines, etc.
OIL STOP filter unit
Applications
Machine tools: multiple machining lathes, cnc, threading machines, gear cutting machines, grinding machines, cold pressing machines, etc.
Food industry: vegetable oil fog spraying machines, alimentary paste machines, etc.
Machine tools: multiple machining lathes, cnc, threading machines, gear cutting machines, grinding machines, cold pressing machines, etc.
Food industry: vegetable oil fog spraying machines, alimentary paste machines, etc.
Compliance to safety standards
The OIL STOP has been designed and manufactured in accordance to the laws and standards set forth by the American Conference Governmental Industrial Hygienists (ACGIH). The OIL STOP meets or exceeds the T.V.L. (Threshold Limit Values) and T.W.A. (Time-Weighted Average) for the maximum acceptable concentration of the different polluting substances (for machine tool mist the maximum value is 5 mg/m3.).
The OIL STOP has been designed and manufactured in accordance to the laws and standards set forth by the American Conference Governmental Industrial Hygienists (ACGIH). The OIL STOP meets or exceeds the T.V.L. (Threshold Limit Values) and T.W.A. (Time-Weighted Average) for the maximum acceptable concentration of the different polluting substances (for machine tool mist the maximum value is 5 mg/m3.).
Maximum efficiency
The OIL STOP performs with a very high level of filtration efficiency (up to 99%). Where bad odor must also be removed, OIL STOP is equipped optionally with CARBO activated charcoal filters. If odors are to be removed the composition of the polluting agents should be supplied us to enable suggest the proper activated charcoals.
The OIL STOP performs with a very high level of filtration efficiency (up to 99%). Where bad odor must also be removed, OIL STOP is equipped optionally with CARBO activated charcoal filters. If odors are to be removed the composition of the polluting agents should be supplied us to enable suggest the proper activated charcoals.
Quiet operation
Due to the layout of its filters, their remarkable absorbing power and the special streamline, the OIL STOP can be used in any environment without causing acoustic pollution. Where very low noise levels are required, OPTIONAL AFON model silencers are supplied.
Due to the layout of its filters, their remarkable absorbing power and the special streamline, the OIL STOP can be used in any environment without causing acoustic pollution. Where very low noise levels are required, OPTIONAL AFON model silencers are supplied.
Options
Depending on the different requirements, OIL STOP can be supplied with CARBO charcoal filters, with absolute filters or with any other type of filter to solve potential problem. As an optional we can supply either a collection tank or a continuous oil drainage system, and, in case of special installation requirements, also high pressure PA/P - PR - AP/T - PR/T - VAP.
Depending on the different requirements, OIL STOP can be supplied with CARBO charcoal filters, with absolute filters or with any other type of filter to solve potential problem. As an optional we can supply either a collection tank or a continuous oil drainage system, and, in case of special installation requirements, also high pressure PA/P - PR - AP/T - PR/T - VAP.
CLEAN FV filter
The CLEAN-FV Filter is used in the mechanics and graphics industries and in other industrial divisions where there is a need to purify air from oily fog produced by processing and to recover filtered oil for recycling.
Operating principle
Air polluted with oily substances passes through a mechanical separator, both of which are inserted in a channel that has the same diameter as the suction mouth. The drops of oil are pushed against the walls of the channel. The metallic screen in the channel prevents the oil from falling back into the flow of air, so that it slides along the walls of the channel to the collection hopper: in a second phase the oil will be collected in a small barrel (supplied as an option) and is eventually recycled.
In this manner nearly all of the oil particles suspended in the air are separated before it passes through a metal wool filter and a pockets filter. Given the high efficiency of both the mechanical separator and the metallic filter, the air at this point no longer contains droplets of oil. To eliminate eventual residual impurities, the air passes through a last pocket filter designed for large surfaces, realised with special top quality material, and is finally expelled through a grill placed on the upper part of the machine.
Dust filter CYCLONFILTER
Application
The CYCLONFILTER wheel mounted extractor-filter unit finds its application
in all cases where conditions of work requires improvement of the cartridges or felt filters efficiency by means of cyclonic pre-filtering of larger granulated dusts. It is mainly used in the following industries: metal industry (grinding, polishing, etc.) rubber, plastic, timber, chemistry. textile, agriculture. foodstuffs,etc.
The CYCLONFILTER wheel mounted extractor-filter unit finds its application
in all cases where conditions of work requires improvement of the cartridges or felt filters efficiency by means of cyclonic pre-filtering of larger granulated dusts. It is mainly used in the following industries: metal industry (grinding, polishing, etc.) rubber, plastic, timber, chemistry. textile, agriculture. foodstuffs,etc.
Versatility in use
The wheel-mounted version of the CYCLONFILTER gives to the unit the possibility of extracting and filtering dusts produced alternatively from various operating machines, placed at a certain distance, and to fasten the discharge operation of dusts and even still to effect the cleaning of the extractor-filter in the open air or more suitable place.
The wheel-mounted version of the CYCLONFILTER gives to the unit the possibility of extracting and filtering dusts produced alternatively from various operating machines, placed at a certain distance, and to fasten the discharge operation of dusts and even still to effect the cleaning of the extractor-filter in the open air or more suitable place.
Energy savings
The CYCLONFILTER permits the attainment of high power savings during winter because the hot air which is perfectly filtered is recycled in the work premises.
The CYCLONFILTER permits the attainment of high power savings during winter because the hot air which is perfectly filtered is recycled in the work premises.
AIRALT cartridge filter
Operating principle
The contaminated air enters from the hopper inlet and due to the abrupt decrease of velocity and the 1ST stage impact filter, the larger particles decant and fall into the dust collection bin. The finer or lighter particles flow through the unit, where the filtering cartridges are placed; the contaminated air flows through the cartridges (AIRALT) or the sleeves (AIRALT/M) from the outside to the inside, therefore the dust deposits outside and the air flows through the filters and is emitted in a purified condition. The gradual accumulation of dust requires a periodical cleaning of the filters: the backwashing cleaning is carried out by a compressed air blast which causes a high frequency oscillating motion to the filters. This air blast technique, also known as “shock wave cleaning” helps the backwashing process.
The contaminated air enters from the hopper inlet and due to the abrupt decrease of velocity and the 1ST stage impact filter, the larger particles decant and fall into the dust collection bin. The finer or lighter particles flow through the unit, where the filtering cartridges are placed; the contaminated air flows through the cartridges (AIRALT) or the sleeves (AIRALT/M) from the outside to the inside, therefore the dust deposits outside and the air flows through the filters and is emitted in a purified condition. The gradual accumulation of dust requires a periodical cleaning of the filters: the backwashing cleaning is carried out by a compressed air blast which causes a high frequency oscillating motion to the filters. This air blast technique, also known as “shock wave cleaning” helps the backwashing process.
The cleaning sequence is carried out on
each filter section, by means of diaphragm magnetic valves managed by a
cycle timer, which determines both pause and operating period or by a
PLC mounted on the control board, taking into account the pressure
differential between clean and dirty zones of the filters. In this way
the conditions of efficiency of the filter are always maintained at a
maximum. Thanks to this highly reliable cleaning method, after an
initial operating period, the filter reaches a nearly constant pressure
drop throughout its operating life.
The unit is fitted with a differential
pressure switch for monitoring the cartridges clogging and the
subsequent pneumatic cleaning cycle. The standard mounted cartridges or
sleeves made from polyester fibres with IFA/BGIA L-PES classification,
ensure a high separation efficiency rate (<0,1%) only with filtration
speed lower than 0.056 m/s, with inlet dust concentration of 200 mg/m3
and particle size between 0.2 and 2 μm. The AIRALT-AIRALT/M filter
equipment allows a maximum vacuum of 5000 mmH2O/0,5 bar on the outlet.
In case of special requests for bigger loss charges or version
requesting Atex versions (filter positioned in zone 22-21 dust / 2-1
gas) please contact our Technical Department. We suggest to protect the
unit against hard weather conditions to ensure a longer life.
Possible variations
Roof-mounted fan (up to 10 HP) with soundproofing box, cartridges removable from below, star valve, leg extension, filtered air expulsion from roof, execution in stainless steel.
Roof-mounted fan (up to 10 HP) with soundproofing box, cartridges removable from below, star valve, leg extension, filtered air expulsion from roof, execution in stainless steel.
Options
Fire extinguisher system, explosion-proof panel, supplemental ring with centrifugal separator.
Fire extinguisher system, explosion-proof panel, supplemental ring with centrifugal separator.
AIRCOMPACT cartridge filters
Dust & fume collector with automatic reverse pulse cleaning.
The Coral Engineering model AIRCOMPACT cartridge filter with a backwashing cleaning capability is composed of cartridge filter elements enclosed in an air tight central body and is conceived for being used in vacuum systems. the filter can be used for treatment of fumes and dusts in mechanical, chemical or pharmaceutical applications.
The Coral Engineering model AIRCOMPACT cartridge filter with a backwashing cleaning capability is composed of cartridge filter elements enclosed in an air tight central body and is conceived for being used in vacuum systems. the filter can be used for treatment of fumes and dusts in mechanical, chemical or pharmaceutical applications.
Working principle
The contaminated air enters from the coupling below the hopper and due to the abrupt decrease of velocity and the 1ST stage impact filter, the larger particles decant and fall into the dust collection bin. The finer or lighter particles flow through the unit, where the filtering cartridges are placed; the contaminated air flows through the cartridges from the outside to the inside, therefore the dust deposits outside and the air flows through the cartridges and is emitted in a purified condition. The gradual accumulation of dust requires a periodical cleaning of the cartridges: the backwashing cleaning is carried out by a compressed air blast which causes a high frequency oscillating motion to the cartridge. This air blast technique, also known as “shock wave cleaning” helps the backwashing process with no need of any other operation.
The contaminated air enters from the coupling below the hopper and due to the abrupt decrease of velocity and the 1ST stage impact filter, the larger particles decant and fall into the dust collection bin. The finer or lighter particles flow through the unit, where the filtering cartridges are placed; the contaminated air flows through the cartridges from the outside to the inside, therefore the dust deposits outside and the air flows through the cartridges and is emitted in a purified condition. The gradual accumulation of dust requires a periodical cleaning of the cartridges: the backwashing cleaning is carried out by a compressed air blast which causes a high frequency oscillating motion to the cartridge. This air blast technique, also known as “shock wave cleaning” helps the backwashing process with no need of any other operation.
Possible Variations: roof-mounted fan (up to 10 HP) with soundproofing
box, cartridges removable from below, star valve, leg extension,
filtered air expulsion from roof, execution in stainless steel.
Options: fire extinguisher system, explosion-proof panel.
CLEAN / CARBO filtering units
Use
The “CLEAN and “CARBO” modular filtering units are used to clean and deodorize air polluted by welding smoke, gas and vapour, fumes, etc…
The “CLEAN and “CARBO” modular filtering units are used to clean and deodorize air polluted by welding smoke, gas and vapour, fumes, etc…
Operating principle
Before being allowed back to the environment, the polluted air leading from the suction points is ducted to the “CLEAN” filtering unit which mainly comprises: a pleated average efficiency pre-filter (87,5% measured according to the ASHRAE 52-76 st.d class G3) made of an electrically-welded galvanized frame which encloses the filtering sector of synthetic-resin=primed, polyester fibre. A high efficiency filter with pockets made of microfibers connected to a galvanized sheet metal frame (95% efficiency measured according to the ASHRAE 52-76-st.d class F9) . If the deodorizing or the absorption of chemical substances or solvents in the air is required, for example, during painting operations or when plastics are processed, the filtered air is passed through the “CARBO” unit which is firmly bolted to the “CLEAN” module. The active carbon used in the “CARBO” unit has a specific area of 1250 sq. m/g, a volume mass of 500 Kg/m3 an iodine value of 1150 mg/g and it is contained in cylinders made of microperforated metallic net which allow easy change of the carbon.
Before being allowed back to the environment, the polluted air leading from the suction points is ducted to the “CLEAN” filtering unit which mainly comprises: a pleated average efficiency pre-filter (87,5% measured according to the ASHRAE 52-76 st.d class G3) made of an electrically-welded galvanized frame which encloses the filtering sector of synthetic-resin=primed, polyester fibre. A high efficiency filter with pockets made of microfibers connected to a galvanized sheet metal frame (95% efficiency measured according to the ASHRAE 52-76-st.d class F9) . If the deodorizing or the absorption of chemical substances or solvents in the air is required, for example, during painting operations or when plastics are processed, the filtered air is passed through the “CARBO” unit which is firmly bolted to the “CLEAN” module. The active carbon used in the “CARBO” unit has a specific area of 1250 sq. m/g, a volume mass of 500 Kg/m3 an iodine value of 1150 mg/g and it is contained in cylinders made of microperforated metallic net which allow easy change of the carbon.
Functionality
Thanks to its modular construction, the high efficiency of the filters and the remarkable withholding capabilities of the active carbon, it is possible to optimise the sizes of the unit according to the amount of air to be treated for capacities between 1500 cu. m/h and 27.000 cu. m/h with filtering areas between 3,3 sq. m. and 61 sq. m. for best performance the “CLEAN” “CARBO” should be used in vacuum.
Thanks to its modular construction, the high efficiency of the filters and the remarkable withholding capabilities of the active carbon, it is possible to optimise the sizes of the unit according to the amount of air to be treated for capacities between 1500 cu. m/h and 27.000 cu. m/h with filtering areas between 3,3 sq. m. and 61 sq. m. for best performance the “CLEAN” “CARBO” should be used in vacuum.
ZINCOVELO spray booth
EUROFILTER dust collector
Eurofilter dust separators are designed
for use in industrial environments. they are robust, solid
forlong-lasting durability, carefully designed for reliability and easy
to use.
EUROFILTER dust separators are suitable
for extracting dusts of differentkinds and dry shavings from single or
multiple dust sources.The EUROFILTER consists of a galvanised steel (Z)
panel structure (paintedon request “V”) with sleeve filters made of
needle felt C type (500 gr/m2withantistatic surface treatment on
request), automatic filters cleaning by motorised vibrator (M) or
pneumatic (P) (compressed air), dusts download in thewheeled metal bins
of easy maintenance.
The very robust structure of the filter
ensures easy handling despite its size,thanks to the presence of large
sized wheels, two of which are pivoting.The unit is conceived in order
to work in depression in order to guarantee themaximum efficiency of
filtration and safety possible against fire and explo-sion. On request,
various accessories certified to ATEX rules are available:electric
motor, explosion relief panel, extinguisher, switchboard, etc...The
backward curved impeller high efficiency centrifugal fan is
positionedinside the unit and therefore soundproofed to obtain a low
noise level.
HANDY dust collector
Portable dust collector complete
polyester filtering bag, plastic collection bag and CE rule thermal
switch, 3 suction hoods Ø 100/L - Ø 120/L - Ø 150/L and floor sweeper,
steel impeller.
Thanks for sharing such a valuable information.I appreciate your work.
BalasHapusdust collector manufacturerss